Canton St. agricultural machinery _ Rolling Factory _ coastal greenhouses greenhouses Rolling machine provided by Canton St. agricultural machinery. We are widely St. Shouguang Agricultural Machinery Co., Ltd. (www.sdguangsheng.com) at: Shandong Weifang specializes in: rolling machines, insulation was, micro drip irrigation, greenhouse construction rolling machine during use pay attention to timely adjust the level of insulation materials straightness, not about the tilt bracket. Use process found abnormal sounds and damage shall immediately take appropriate measures to check and troubleshooting, prohibit the use of force runs to prevent danger. Rolling machine as a result of rain, snow, or other factors make the insulation material increase in weight, buy the machine load increases greenhouse rolling machines, drying or should be managed to reduce the weight and then put the boot volume. When necessary, appropriate roll part, to facilitate crop light. Currently, greenhouses Rolling machine requires 380 volts operating voltage, and for the three-phase power. Therefore, from the knife to the inverted switch, inverted switch and then rolling machine host, the two distance require the use of wires with insulation sheath. Features base embedding and cables shed rolling machines offer, we recommend that farmers be properly connected. From the knife to the inverted switch, since the distance is relatively long, mostly from the former studio head to the roof or shed, so the choice of the embedding more suitable, these strands can be buried in the ground, to prevent the impact of the greenhouse operation. Switching from inverted to host greenhouses rolling machines Rolling Factory, a short distance greenhouses rolling machines, no buried in the ground, the choice is more appropriate cable. If both upside down to use, easy off, an accident, it is because the embedding is copper, aluminum conductor cable is.