Canton St. agricultural machinery _ Rolling Factory _ Changle greenhouses greenhouses Rolling machine provided by Canton St. agricultural machinery. We are widely St. Shouguang Agricultural Machinery Co., Ltd. (www.sdguangsheng.com) at: Shandong Weifang specializes in: rolling machines, insulation was, micro drip irrigation, greenhouse construction, if not installed rolling machines, when placing the insulation is the most Well someone special standing in the center of the greenhouse to be suppressed, that each additional insulation when a bed is, people are standing in its central position until the last bed when coupled with a brick or other heavy object will Its most suppress the west, and then seize the time covering the latest film greenhouses rolling machines, laminating pressure will then be on good insulation firmly many greenhouses Rolling Factory, basically will not be scraping turn. If you installed the greenhouses rolling machines, relatively speaking, when the wind was relatively easy to place insulation, insulation materials placed open switch, the decentralization process in greenhouses rolling machine, in the westernmost Greenhouse pressure on bricks, etc. weight can be. As a result, after placing the good of the insulation material, a line of brick sheds also add a good electric rolling machine, and then covered with the coating. If the coverage is based on two wind to be, and a good combination of wind pressure at the film. Note greenhouses Rolling machine to use: 1, rolling machine for the first time shed preceded injected into the body butter 1.5 kg, after replacing the maintenance once a year. 2, the installation or use, should always check the host and all the screws are loose connections, broken welds whether to open welding and other issues. 3, stopping after each use, should be promptly cut off Pengwai total power. In control near the switch, you must draw a line on a switch. 4, after installing rolling machines, must cover attached to the film on the grass thatch. 5, after the greenhouses Rolling machine starts, the former shed non someone, not near the vertical scroll bar and grass thatch, and must have an adult waited at the power switch. 6, to decentralization in the end, or when the volume up to 30 cm away from the roof to be shut down. 7, before and during use, the clutch system must be oiled. 8, the user must accept the installation people trained during installation. 9, when the user to purchase and install the required test moisturizing long felt shed weight, the choice of appropriate materials and good welding process.