Canton St. agricultural machinery, greenhouses Rolling Factory, Hanting greenhouses rolling machine provided by the Canton St. agricultural machinery. We are widely St. Shouguang Agricultural Machinery Co., Ltd. (www.sdguangsheng.com) at: Shandong Weifang specializes in: rolling machines, insulation was, micro drip irrigation, greenhouse construction, if not installed rolling machines, when placing the insulation is the most Well someone special standing in the center of the greenhouse to be suppressed, that each additional insulation when a bed is, people are standing in its central position until the last bed when coupled with a brick or other heavy object will Its most suppress the west, and then seize the time covered with the coating, the heat is on securely lot, basically can not be scraped after the film turned good pressure. If you installed the greenhouses rolling machines, relatively speaking, when the wind was relatively easy to place insulation, insulation materials placed open switch, in the process of decentralization Side greenhouses rolling machine, in the westernmost Greenhouse pressure on brick blocks and other heavy objects can be. As a result, a good place after the insulation material shed rolling machines, also added a good brick row, and then covered with the coating. If the coverage is based on the wind to set two greenhouses Rolling Factory, and a good combination of wind pressure at the film. For safe use of greenhouses Rolling machine, to prevent accidents, the company recommends customers focus on the following matters: 1 first-time users before rolling machine shed needs please read the instruction manual. Before 2., greenhouses Rolling machine body to inject oil 4 kg small greenhouses rolling machines, later to be replaced once a year. 3 In the installation or use, should always check the host and all the screws are loose connections, broken welds whether to open welding and other issues. 4 Before using the brake clutch system must be oiled to maintain lubrication to avoid early wear and tear, resulting in brake failure. 5. volume to upward rolling machine shed roof 30 cm, must be shut down. In case of brake failure dashing down the inverted switch to (reverse) direction, so rolling machine down properly after maintenance.